Pack Contents
Installation Instructions
& User Guide
Specifications
Maximum Inlet Water Temperature
Inlet Connections
Dynamic Water Pressure
Tools You’ll Need
Prior to Installation
Crosshead Screwdriver
Flat Screwdriver
Pipe Cutter
Adjustable Spanner
Please leave these instructions
with the end user
Product Code: VAL2 BRDSM C CD (D2)
All products manufactured and supplied by Bristan are safe
provided they are installed, used correctly and receive regular
maintenance in accordance with these instructions.
This product has been tested to the Water Regulations Advisory
Scheme (WRAS) and satisfies the requirements of the Water
Supply (Water Fittings) Regulations 1999 and current bylaws.
For full Installation Requirements & Notes (IRN)
please visit
wras.co.uk/directory.
We recommend isolation valves to be fitted to the inlet water
supplies to ensure ease of future maintenance.
Before installing these taps the water supply must be thoroughly
flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will
invalidate the guarantee.
60-65
°
C
recommended
To replace any spare parts
for your tap, why not
scan the QR Code or
visit
www.bristan.com
and search for your product.
Spare Parts
1.0
5.0
Pressure
BAR
0.2
4.0
2.0 3.0
Pressure
BAR
1.0
5.0
0.2
4.0
2.0
3.0
Maximum Static Pressure: 10.0 bar
1/2”BSP
Min: 0.2 bar
Max: 5.0 bar
3
4
5
2
1
REMEMBER
Hot on the
left, cold on
the right!
Secure the taps to the sink by
using the washer and metal
backnut below the sink.
Installation
Connect the hot and
cold water supplies to
the threaded tails.
Choose your desired leg position for the correct inlet centres.
Screw the legs to the tap
body, ensuring the top
washers and lower o’ring
are in place.
Screw the plinths on
to the tap legs.
Place the washers over
tap holes and feed the tap
through the holes
IMPORTANT
Turn on w
ater
supply f
or a few
minutes and check
all joints and
connections f
or
any leak
s .
160
mm
200
mm
240
mm
x
1
x
2
x
2
x
2
x
2
x
2
x
2
x
2
