2
2
1
Operation-Clicker Waste
Fit the waste body and rubber
washer into the basin
Place shaped rubber washer
under the basin & secure
waste by tightening backnut
To release
water, press
the button
again
To fill the
basin, the
button needs
to be pressed
down
Installation - Basin Mixer
Installation Instructions
& User Guide
Please leave these instructions
with the end user
Product Code: PS2 BAS C
(D2)
1.0
5.0
Pressure
BAR
4.0
2.0 3.0
60°C
Specifications
Max
80°C
Maximum Static Pressure: 10.0 bar
Inlet Water Temperature
Inlet Connections
Min:
0.3
Max: 5.0
Dynamic Water Pressure (Bar)
5°C
25°C
Cold Water Supply
Min: 5°C Max: 25°C
60-65°C
Recommended
Tools You’ll Need
80°C
Maximum
Prior to Installation
All products manufactured and supplied by Bristan are
safe provided they are installed, used correctly and recieve
regular maintenance in accordance with these instructions.
This product has been tested to the Water Regulations
Advisory Scheme (WRAS) and satisfies the requirements
of the Water Supply (Water Fittings) Regulations 1999 and
current bylaws.
For full Installation Requirements & Notes (IRN) please
visit.
www.wras.co.uk/directory
Isolation valves must be fitted to the inlet water supplies to
ensure ease of future maintenane.
Before installing these taps the water supply must be
thoroughly flushed in order to remove any swarf, solder
etc from the pipework.
Hot Water Supply
Pack Contents
65°C
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0
0
Flexible 1/2”
BSP
1
12
2
1
Adjustable Spanner
Pipe Cutter
Flat Screwdriver
Hexagonal Keys
Installation- Clicker Waste
Feed the flexi tails
through the hole in
the basin.
Screw the flexi tails
into the
bottom of the mixer
body by
hand only.
(DO NOT
OVERTIGHTEN
)
Place the plinth over the hole
in the basin ensuring that the
washer is fitted between the
plinth and the basin.
x1
x1
x1
x1
x2
2
4
3
4
Slide the
‘C’ shaped
rubber
washer
and the ‘C’
shaped metal
washer onto
the fixing
rods up to
the underside
of the basin.
Secure the mixer in place
by tightening the fixing
nuts onto the fixing rod
against the ‘C’ shaped
metal washer.
Connect
the
flexible
tails to
the water
supplies.
system.
Slight
bend
90
°
angle
Kinks
Curved
round
Twists
Flexible Connecting pipes
5
5
Turn on the mains
water supply and
check all joints and
connections f
or
leaks!
All manuals and user guides at all-guides.com
