6
4
Hot
Cold
3
1
Pack Contents
Installation Instructions
& User Guide
Specifications
Inlet Water Temperature
Inlet Connections
Dynamic Water Pressure
Tools You’ll Need
Prior to Installation
Adjustable Spanner
Hexagonal Keys
Installation
Please leave these instructions
with the end user
Product Code: NR BSM C (D4)
All products manufactured and supplied by Bristan are safe to use
provided that they are installed, operated and receive regular
maintenance in accordance with these instructions.
This product needs to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999
and current by-laws. For full Installation Requirements & Notes (IRN)
please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure
ease of future maintenance.
Before installing this product the water supply must be
thoroughly flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will
invalidate the guarantee.
Full access must be made available for future
maintenance/servicing purposes.
If in doubt, contact a registered plumber or your Local Water
Authority or the Secretary of the Institute of Plumbing,
address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
3/4” BSP
2
Fit the taps to the bath, ensuring
the plinth is in place.
Secure the taps to the basin by
using the washer and metal
backnut below the basin.
Connect the hot and cold water
supplies to the threaded tails.
Turn on the water supply.
IMPORTANT
Turn on w
ater
supply f
or a few
minutes and check
all joints and
connections f
or
any leak
s.
65°C
5°C
25°C
Cold Water Supply
Min: 5°C Max: 25°C
Hot Water Supply
65°C Recommended
REMEMBER
To fit
isolation v
alves
for maint
enance
purposes
x1
x2
x2
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
Maximum Static Pressure:
10.0 bar
Min:
0.2 bar
Max:
5.0 bar
Pipe Cutter
5
Screw the wall bracket
to the desired position,
ensuring the hose
and handset can reach.
(Bracket may look different
to image above)
To replace any spare parts
for your tap, why not
scan the QR Code or
visit
www.bristan.com
and search for your product.
Spare Parts
x1
x1
x1
Connect
the hose
and
handset
to the bath
filler.
(Bracket
may look
different
to image
shown)
