8mm
Installation Instructions
& User Guide
Please leave these instructions
with the end user
Product Code: EF KIT PK (D1)
1
Screw the
flexible tails
into the base.
DO NOT
OVERTIGHTEN
Feed the base
through the
sink hole from
the top.
If the surface the tap is being fitted to is over the
stated tolerance; or you feel the tap needs extra
stability, follow the alternative steps overleaf.
Specifications
Maximum Static Pressure:
10.0 bar
Inlet Water Temperature
Inlet Connections
Please refer to your Tap Instructions
Dynamic Water Pressure
5°C
25°C
Cold Water Supply
Min:
5°C
Max:
25°C
65°C
Recommended
Watch these Taps
being Fitted
Scan the QR code to visit our YouTube
channel and see a video guide of how
these taps are fitted.
1/2” BSP
Flexible
Tails with
Isolation
Valves
Tools You’ll Need
Alternatively visit
www.youtube.com/BristanTV
Prior to Installation
Hot Water Supply
Pack Contents
65°C
All products manufactured and supplied by Bristan are safe provided
they are installed, used correctly and recieve regular maintenance in
accordance with these instructions.
This product has been tested to the Water Regulations Advisory
Scheme (WRAS) and satisfies the requirements of the Water Supply
(Water Fittings) Regulations 1999 and current bylaws.
For full Installation Requirements & Notes (IRN) please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease
of future maintenance.
Before installing these taps the water supply must be thoroughly
flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will invalidate the
guarantee.
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
2
6.0
mm
Turn the hexagonal
key clockwise until
the base is secured.
6.0
mm
Olive
Connect
the hot and
cold water
connections.
Compression
Nut
Flexible Connecting Pipes
Spare Parts
5
To replace any spare parts
for your tap, why not
scan the QR Code or
visit
www.bristan.com
and search for your product.
6
8
9
7
4
x1
Adjustable Spanner
Pipe Cutter
x1
x1
Installation
Hexagonal Key
EasyFit Tool
x1
x2
3
Slight
bend
90°
angle
Kinks
Curved
round
Twists
Grease the
O-Rings using the
Molykote Grease
provided.
You will now need
your EasyFit Tap.
Please refer to
those instructions
to check the Pack
Contents and
Tap Maintenance.
Secure in place with
the grub screws using
the tool provided.
Thread the
hexagonal key
through the
EasyFit tool and
tighten the grub
screws with an
extra 1/2 turn.
Place your
desired tap
onto the base.
REMEMBER
hot on the
left, cold on
the right
If the surf
ace
the tap is being
fitted to is thin,
follow the
alternative s
teps
overleaf
Drop the Plain Inlet
Connector into
the base.
REMEMBER
Make sur
e the
base is c
entralised
when vie
wed from
the front
