2
Safety Information
WARNING:
To reduce risk of injury and property damage, you must read this entire guide before assembling,
installing, and operating dispenser�
WARNING:
This product dispenses water at very high temperatures� Failure to use properly can cause
personal injury� When operating this dispenser, always exercise basic safety precautions, including
the following:
•
Prior to use, this dispenser must be properly assembled and installed in accordance with this
manual�
•
This dispenser is intended for water dispensing only� DO NOT use with other liquids or for
purposes for which it was not intended�
•
Use only known and microbiologically safe bottled water�
•
For indoor use only� Keep water dispenser in a dry place away from direct sunlight� DO NOT use
outdoors�
•
Install and use only on a hard, level surface�
•
DO NOT place dispenser into an enclosed space or cabinet�
•
DO NOT operate dispenser in the presence of explosive fumes�
•
Position back and sides of dispenser at least 8 in� (20 cm) from walls to permit free airflow
between wall and dispenser� PLEASE NOTE: For optimal performance, it is recommended the
back and non-fan-outlet side of the dispenser be placed 12 in� (30 cm) from walls, and the fan-
outlet side of the dispenser be placed 19�5 in� (50 cm) from the wall�
•
Use with only a properly grounded GFCI outlet�
•
DO NOT use an extension cord with your water dispenser�
•
Always grasp plug and pull straight out from outlet� Never unplug by pulling on power cord�
•
DO NOT use dispenser if cord becomes frayed or otherwise damaged�
•
To protect against electric shock, DO NOT immerse cord, plug, or any other part of dispenser in
water or other liquids�
•
Ensure dispenser is unplugged prior to cleaning�
•
Never allow children to dispense hot water without proper and direct supervision� Children
should be supervised to ensure they do not play with dispenser� Keep the dispenser and its
power cord out of reach of children younger than 8 years old�
•
Service should be performed only by a certified technician�
•
DO NOT damage the refrigerant circuit�
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard�
•
DO NOT immerse dispenser in water or any other liquid�
•
The appliance must not be immersed
•
ALWAYS keep ventilation openings, in the dispenser enclosure or in the built-in structure, clear
of obstruction�
•
DO NOT use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer�
•
DO NOT store explosive substances such as aerosol cans with a flammable propellant in this
dispenser�
•
This dispenser is not suitable for installation in an area where a water jet could be used�
•
Never turn the dispenser upside down or lean it more than 45°�
•
The optimal working environment temperature and humidity level for this dispenser is 50 °F-
100�4 °F (10 °C-38 °C) and ≤90% humidity�
