CAUTION:
Some parts may contain
sharp edges. Wear
protective gloves if
necessary.
WARNING:
Only use the specific orifice
designated for your grill
model. Always double
check the millimeter size
on the side of the orifice tip
prior to installation. Use of
any other orifice could lead
to personal injury, property
damage and void your grill
warranty.
Note:
Make sure all control knobs are
in the off position, LP tank valve
is closed and tank is
disconnected
from regulator and removed
from grill.
Step 1
Using an adjustable wrench to hold
the gas manifold connection secure,
use a 3/4” wrench to loosen the hose
connection nut. Replace existing LP hose/
regulator assembly with natural gas 10’
hose assembly. Tighten the connection
carefully using two wrenches
.
Step 2
Open hood and remove warming rack,
cooking grills and heat shields. Set aside
for later use.
5
CONVERSION
INSTRUCTIONS
810-6570-F
Gas Manifold Nut
10’ Natural Gas Hose
READ INSTRUCTIONS
BEFORE LIGHTING:
1. Open lid during lighting.
2. Select a burner to be lit. Push and turn
control knob of that burner to “HIGH”.
Press electronic igniter and hold for
3-5 seconds.
3. If ignition does not occur in 5 seconds,
turn control knob to “OFF”, wait
5 minutes and repeat lighting
procedure.
VEUILLEZ LIRE LES INSTRUCTIONS
AVANT L'ALLUMAGE :
1. Ouvrez le couvercle avant d’allumer
le brûleur.
2. Décidez quel brûleur allumer en
premier. Appuyez et faites tourner
le bouton de réglage de ce brûleur
sur "élevé". Appuyez la bougie
électronique et maintenez-la
au moins 3-5 secondes afin
d’allumer le brûleur.
3. Si le brûleur ne s’allume pas dans
les 5 secondes, faites tourner
le bouton de réglage sur "éteint",
attendez 5 minutes et répétez la
procédure d’allumage.
