Wheel Cardz
™
by Brightz
Instructions
©
Copyright Brightz, Ltd. 2019
Patent Pending • All rights reserved
Step 1 – Placement
Select a position on the bike where you want to place
Wheel Cardz™. See diagram for recommended
placement.
Loosen the screw on the clamp to open it. Position the
clamp around the bike frame so that the clip mouth is
facing the wheel spokes and tighten the screw.
Step 2 – Insert Card
Insert any card into the clip, making sure the card is secured in both sets of rubber teeth. Adjust the card
and clamp so that about 1/4" inch of the card is in between the spokes.
Rubber Teeth
