JB-QB-5Ei
Users’ Manual
JB-QB-5Ei
Fire Alarm Control Panel
32
Register bus device
001/005
current registered
device total number
current registering
progress (from 1 to 250)
Register bus device
001/005
current registered
device total number
current registering
progress (from 1 to 250)
Figure 10 Register bus device display
Register other device
1.Extl control unit
5
2.Fire Alarm Repeater panel 1
3.Printer
Yes
registered device
numbers
Register other device
1.Extl control unit
5
2.Fire Alarm Repeater panel 1
3.Printer
Yes
registered device
numbers
Figure 11 Register other external device display
5.3.5 Browse registered information
Browse system registered device state, such as device number, register value, position information,
total numbers and so on. In debugging menu, press
【
3
】
key to enter register browse function
(Figure 12).
3. Browse
UP DOWN-page,LEFT RIGHT-loop,ESC-return
001 27 SMOK room 1001
002 28 SMOK
003 27 SMOK
004 28 SMOK
005 27 SMOK
006 28 SMOK
007 27 SMOK
device
number
device registered
value
device type
device location information
(pls refer to 5.3.6
）
01L :225
Loop 1 device
total number
3. Browse
UP DOWN-page,LEFT RIGHT-loop,ESC-return
001 27 SMOK room 1001
002 28 SMOK
003 27 SMOK
004 28 SMOK
005 27 SMOK
006 28 SMOK
007 27 SMOK
device
number
device registered
value
device type
device location information
(pls refer to 5.3.6
）
01L :225
Loop 1 device
total number
Figure 12 Browse registered information display
If the device has confirmed to be connected into the system, but in “register browse”, the operator
cannot find this device number. The operator can check this device operation status in “parameter
test”. In debugging menu press
【
7
】
->
【
1
】
key to enter parameter test function (Figure
