Brightlink BLIP-A300TR-P-P, Руководство пользователя

Страница: 11 / 51

BRIGHTLINK 4K IP AV DISTRIBUTION
6
4. System Connection
4.1 Usage Precaution

Make sure all components and accessories are included before installation.

The system should be installed in a clean environment with proper temperature and
humidity.

All of the power switches, plugs, sockets, and power cords should be insulated and
safe.

All devices should be connected before being powered on.
4.2 Connection Type
There are three types of possible applications:
Extender (Point-to-Point)
In a point-to-point configuration, there is no need for a switch. Distribute full,
uncompressed data up to 4K@60Hz 4:4:4 resolution as well as 1G Ethernet, audio and
control signals over a single copper cable.
Splitter (One-to-Many)
With only one
BLIP-A300TR-P
-P as transmitter and one 10G Ethernet
s
witch, any A/V
signal can be flawlessly and instantly distributed to a near limitless number of receivers
and screens, any number of times.
Matrix Switcher (Many-to-One, Many-to-Many)
The combination of switching and splitting enables a completely scalable matrix
system. Independently route video, audio and control signal from any source to any
endpoint.