
BrightDrop EV600 Owner Manual (GMNA-Localizing-U.S.-15563034) -
2022 - CRC - 9/29/21
12
Keys, Doors, and Windows
1. Press the button on the side of the
remote key near the bottom and pull the
mechanical key out. Never pull the
mechanical key out without pressing the
button.
2. Use the mechanical key blade in the slot
to separate and remove the back cover.
3. Pull on the tab to access the battery.
4. Lift the battery with a flat object. Do not
use a metal object.
5. Remove the battery.
6. Insert the new battery, positive side
toward the back cover. Replace with a
CR2450 or equivalent battery.
7. Place the seal back into the groove
around the battery compartment.
8. Push together the remote key.
9. Reinsert the mechanical key.
Remote Vehicle Start
If equipped with the remote start feature,
the climate control system will come on
when the vehicle is started remotely
depending on the outside temperature.
The rear defog and heated and ventilated
seats, if equipped, may also come on. See
.
Laws in some communities may restrict the
use of remote starters. Check local
regulations for any requirements on remote
starting of vehicles.
The vehicle cannot be remote started if:
.
The remote key is in the vehicle.
.
The hood is not closed.
.
Thirty minutes of total remote start time
has been used.
.
The hazard flashers are on.
.
The vehicle is not in P (Park).
.
The vehicle is not off.
The remote key range may be reduced
while the vehicle is on.
Other conditions can affect the performance
of the remote key. See
or
.
Starting the Vehicle Using Remote Start
1. Press
S
twice on the remote key. The
turn signal lamps will flash. The lamps
flash to confirm the request to remote
start the vehicle has been received.