BRIGHT BLUE COLIBRI RX, Быстрый старт, Страница: 14 / 15

©Copyright FR-V2016
Les informations contenues dans ce document peuvent être modifiées sans préavis.
13
8 Electrolysis Hour Totalizer
This equipment has an electrolysis hour counter to monitor the use and the life of the
electrolysis cell. The device counts the time when it is actually in production, not considering the
when it is connected, but in standby mode. To view the total number of hours already used, press
the control key for 5 sec. until the information appears on the screen.
9 Terms and Conditions
9.1 Copyright
This User Manual contains information secured by copyright. All rights are reserved to
Bright Blue, Lda.
This User Manual has been written for personal use. The copy, reproduction or translation of the
present document, as a whole or partially, requires prior written consent from Bright Blue, Lda.
9.2 Warranty
This product, composed by the electronic controller and accessories, was constructed and
tested in accordance with the security measures applicable to electronic devices and has
undergone the most rigorous quality controls, leaving the factory in perfect condition.
This warranty applies to products manufactured by Bright Blue Ltd, in accordance with the
terms and conditions of the company.
The Bright Blue Ltd guarantees the product manufactured in accordance with the
conditions and responsibilities of these terms for a period of:
 COLIBRI: 3 years or 12.500h of operation for the electrolysis cell; 5 years for the electronic
equipment; Twelve months for temperature probes, except ware out.
 PLUMA: 2 years or 10.500h of operation for the electrolysis cell; 2 years for the electronic
equipment.
The Bright Blue Ltd reserves the right to change the terms and conditions of this warranty,
without notice, even after the invoice date of purchase, applying the terms and conditions in force
.
9.3 Warranty Exclusions
Warranty and Responsibility does not apply to:

accessories, consumables and peripherals that are not included in the original product
package and/or that have been purchased to other companies;
 original identification marks that have been torn, changed or removed from the
equipment or product;
 S/N that have been torn, changed or removed from the equipment and/or from its
components;
 flaws and defects due to accidents, negligence or improper use of the equipment and its
components; flaws and defects from improper electrical installation; unusual physical or
electrical stress; disrespect for environmental rules, abnormal conditions of temperature,
moisture, corrosive matters or other climate conditions that spread beyond the
predefined limits;

operation beyond capacity, failure to report to Bright Blue within the warranty period,
substitution of parts not approved by Bright Blue, failure or damage due to
misapplication, lack of proper maintenance, abuse or improper installation;

use and operation of the equipment, or product, in contradiction to the system’s
documentation written by Bright Blue;

system failure that according to Bright Blue is not due to raw material defect or fabrication
deficiency;