Briggs & Stratton F020377, Руководство оператора

Страница: 11 / 132

11
Features and Controls
Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A - Recoil Starter — Used for starting the engine manually.
B - Oil Fill / Dipstick — Check and fill with oil here.
C - Pump — Develops high pressure.
D - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
E - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
F - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
G - Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
H - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
Items Not Shown:
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
Detergent Siphoning Tube / Filter — Use to siphon pressure
washer safe detergents into the low pressure stream.
High Pressure Outlet — Connection for high pressure hose .
Primer Bulb — Prepares a cold engine for starting.
Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connection for garden hose.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
B
A
D
,
C
F
E
G
H