![Briggs & Stratton 71 Piece Air Tool Kit Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/briggs-and-stratton/71-piece-air-tool-kit/71-piece-air-tool-kit_operators-manual_2811484007.webp)
5
Air Motor Lubrication
IMPORTANT – These air tools require
lubrication BEFORE initial use and BEFORE
and AFTER each additional use for the life of
the tool.
To properly lubricate the air tool:
1.
Disconnect air tool from air hose and hold
tool upside down.
2.
Pull air tool’s trigger and pour one teaspoon
of air tool oil (supplied) in tool’s air inlet
fitting.
3.
Push or rotate reverse control back and forth
from stop to stop to help circulate oil in
motor.
4.
Connect air tool to air supply and cover its
air exhaust port with a towel. Run the tool in
both forward and reverse directions for
20 seconds.
5.
Excess oil will discharge from exhaust port
when air pressure is applied. Always direct
exhaust port away from people or objects.
The air tool is now lubricated and ready for use.
Other Recommendations
These air tools require lubrication during
operation. This will extend the life of the tool. As
shown below, air (
A
) is supplied by the
compressor, passes through a water filter (
B
), a
pressure regulator (
C
), an automatic oiler (
D
),
and through a quick connect air coupling (
E
).
One end of the air hose (
G
) is fitted with a
connection plug (
F
) and a quick connect
coupler (
E
) . Each air tool will have a connection
plug (
F
) to receive the air (
H
).
Non-Lubricated tools, such as the air blow gun
tool or the tire inflation tool, uses a similar in-line
air supply that
does not
have the oiler device
(
D
). Never use an oiler in the air supply for
spray painting operations.
C
B
F
F
A
D
G
H
E
E
Содержание 71 Piece Air Tool Kit
Страница 21: ...Reserved...
Страница 42: ...Reserved...
Страница 43: ...Reserved...
Страница 44: ...BRIGGS STRATTON HOME POWER PRODUCTS GROUP LLC JEFFERSON WI USA BRIGGSandSTRATTON COM...