Briggs & Stratton 71 Piece Air Tool Kit, Руководство оператора

Страница: 17 / 44

15
T Trro ou ub blle essh ho oo ottiin ng g
P Prroobblleem m P Poossssiibbllee C Caauussee((ss)) C Coorrrreeccttiivvee A Accttiioonn((ss))
Tool runs slowly or 1. No oil in tool 1. Lubricate tool
will not operate 2. Grit or gum in tool 2. Flush tool with air tool oil, gum solvent, or an equal mixture
of SAE 10 motor oil and kerosene.
3. Low air pressure 3. A. Adjust tool air regulator to maximum setting.
B. Adjust compressor regulator to tool maximum PSI.
4. Air hose leaks 4. Tighten and seal hose fittings
5. Pressure drops 5. A. Be sure air hose is proper size.
B. Do not use multiple hoses connected with quick
connect fittings. Directly connect hoses together.
6. Worn rotor blade 6. Replace rotor blade
7. Worn ball bearing 7. Remove and inspect bearing for rust, dirt and grit or worn
race. Replace or clean and regrease bearing
Moisture blowing out 1. Water in tank 1. Drain tank. Oil tool and run until no water is evident.
of tool 2. Water in air hoses 2. A. Install a water filter
B. Install an air dryer
Impacts slowly or 1. Lack of lubrication 1. Lubricate air motor and impact mechanism.
will not impact 2. Tool regulator set in wrong position 2. Adjust tool regulator to maximum setting
3. Inline regulator set too low 3. Adjust air supply regulator for more pressure
Impacts rapidly but will
not remove bolts 1. Worn impact mechanism 1. A. Replace worn impact mechanism components.
B. Return impact wrench for repair
Does not impact 1. Broken impact mechanism 1. A. Replace broken impact mechanism components.
B. Return impact wrench for repair.