Briggs & Stratton 71 Piece Air Tool Kit, Руководство оператора

Страница: 13 / 44

11
counterclockwise. Insert the desired chisel. Slide
the spring retainer over the chisel and thread it
onto the air hammer.
Always tighten the spring retainer before use
and periodically during use.
CAUTION Use chisel attachments designed for
use with air hammers. Do not use damaged
attachments.
Depress the trigger to operate. Always hold the
hammer securely during operation to avoid
injury.
3/8 in. Drive Ratchet Wrench
Description
This ratchet wrench is designed for removing
and installing spark plugs and different engine
parts such as water pumps, radiators, and so
forth. It is ideal for use in confined areas where
hand tools are cumbersome.
Ratchet Wrench Operation
NOTICE This ratchet wrench requires lubrication
BEFORE initial use and BEFORE and AFTER
each additional use throughout its life. Follow
the instructions in
Air Motor Lubrication
described in Assembly to lubricate this tool.
CAUTION Inspect the ratchet before use to
ensure there are no loose components and for
the absence of defects or other conditions that
may affect safe operation.
Before each use, drain water out of air
compressor tank and condensation from air
lines.
NOTICE The ratchet wrench should never be
used to set torque. Use a torque wrench to set
the torque.
Select the desired hand tool 3/8 in socket or
adapter and press onto wrench. Tug socket or
adapter to ensure it is attached securely.
• When operating ratchet wrench, always wear ANSI-
approved hearing protection.
• Always wear ANSI Z87.1 approved safety glasses with
side shields.
• Wear a full face shield if you are working overhead.
• Wear an ANSI approved dust mask or respirator
when working around metal, wood, and chemical
dusts and mists.
W WA AR RN NIIN NG G
Using an air ratchet wrench can
cause loud noises.
Ratchet tool attachments can
disintegrate without warning, causing
flying debris.