2021 Owner’s Manual Navigator26
BRIG ltd
51
Use the front towing U-bolts and rear lifting U-bolts to fix the boat with straps to the trailer.
After storing the boat on keel blocks or after transporting it on a trailer, carefully inspect the boat's hull. There should be no
damage to the boat's hull.
All dimensions are in mm. Permissible devi/- 50mm.
Maximum transportable mass: 2330 kg
Incorrect installation of the boat on a trailer or keel-blocks can damage the boat's hull.
You can always get more information from the BRIG dealer regarding the installation of the boat on a trailer
or keel-blocks for storage.
To mount the boat on a trailer, always use the entire surface “Main loading area (keel line)”
or the recommended “Point of supports” on it.
Securely fix the boat with straps to the trailer using the front and rear U-bolts.
When towing a boat on a trailer, periodically check that it is securely attached to the trailer.
COVERING THE BOAT WITH A COVER.
To protect your boat from ultraviolet radiation, bad weather, dust, we recommend using a cover kit. The cover kit consists
of a console cover and a stern seat cover (Fig.23, Fig.24).
Console cover can be of two versions: for a boat without a T-
Top (Fig.23) and for a boat with a T-Top (Fig.24). Stern seat cover is the same for both versions.
Just cover the steering console and the driver's seat with the console cover. Fix the console cover with snap fasteners to
the boat hull.
Make sure that all the snap fasteners are locked.
In the T-Top version, you will also need to fasten the zip
fastener and buckle belts.
