2021 Owner’s Manual Navigator26
BRIG ltd
36
If you are leaving the boat and there is a possibility of rough water or strong wind, use only bow U-bolts (2) to bow
mooring.
Make sure that the mooring rope does not damage the buoyancy tube or other elements of the boat.
Rope for mooring must be appropriate strength, diameter and length.
Cleats for mooring are designed for a maximum horizontal load of 19kN.
The breaking strength of rope shall in general not exceed 80 % of the breaking strength of the respective strong point.
Fig.14
1 - bow cleat
2 – two bow U-bolts
3 - two stern cleats
Be careful when mooring or navigating near rocky shores.
Tube can be damaged with sharp objects.
Do not use for mooring any structural elements of the boat that are not designed for this.
Be careful when mooring. Suddenly tensioned mooring ropes may cause injury.