2021 Owner’s Manual Navigator26
BRIG ltd
33
Remove the stern locker (28) Fig.2 (port side, aft seating). You will get access to the drain faucet (8). Open the drain
faucet and wait for the water to drain
through the drain nozzle (9) from the water tank.
Flush the water tank using the raw
water system.
Close the drain faucet (8) and set the stern locker (28) Fig.2.
Never turn on the aerator pump if there is no water in the built-in water tank. This will damage the pump.
The water drain faucet must always be closed.
Always close the faucet
after draining water from the tank.
Periodically inspect the water drain faucet, drain nozzle with drain hose.
There should be no water leakage into the boat hull.
Water leakage into the boat hull can cause the boat to flood.
Water on freezing can damage the aerator system.
Water from aerator system must be removed if there is a risk of freezing.
Rinse the pump, aerator and hoses periodically with clean running water,
then ventilate and dry.
This will prevent the formation of mold, mildew and improve the efficiency of the aerator.
TOWING.
Boat towing.
There is U-bolt in the bow ((1) Fig.12) of your boat for towing.
On some boat modifications, two U-bolts can be installed.
Use both U-bolts at the same time to tow your boat. In towing rope (2) should be a hook (3) to quickly disconnect your
boat from the tugboat. This rope is not supplied by the manufacturer. You must purchase it yourself from BRIG dealers.
