Eagle 6.7-2019
236G.01
— 27 —
For mooring on the boat are installed (Fig D10.2):
1 - two bow cleats, 2 - two U-bolts, 3 - two stern cleats.
Use bow cleats (1) only for mooring in calm water for a short time. If you are leaving the boat and there is a possibility of
rough water or strong wind, use only bow U-bolts (2) to bow mooring.
Always use the rear cleats for mooring.
Do not use other parts or elements of the boat for mooring.
Make sure that the mooring rope does not damage the buoyancy tube or other elements of the boat.
Rope for mooring must be appropriate strength, diameter and length.
MOORING.
D10.2
2
1
3
U-bolts for mooring is designed for a maximum
horizontal load of 19.3kN.
Stern cleat for mooring is designed for a
maximum horizontal load of 15.8kN.
The breaking strength of rope shall in general not
exceed 80 % of the breaking strength of the
respective strong point.
Be careful when mooring.
Suddenly tensioned mooring ropes may cause
injury.
