— 14 — "BRIG" inflatable boats
The boat hull has "deep-V" shaped bottom with four longitudial steps. The
upper deck surface has a special moulded antiskid coating. There are five
specified sections (Fig. D2):
— bow anchor locker (1) is intended for arrangement of anchor and
anchor chain/rope;
— bow locker (2) is intended for baggage arrangement;
— locker under the seat of steering console base part (3) is intended for
baggage arrangement;
— deck compartment
(4) is intended for arrangement of fuel tank;
— stern locker (7).
In addition there is polyester underpan installed into the steering console
base part (6), which separate steering console from deck compartment. The
bow locker and stern locker have a direct access by hinge out the access
doors (respectively 15 and 17 positions).There is an inspection hatch located
on the deck (16) for survay of the fuel tank, pipe lines and electric contacts.
Onto the bow locker there are removable soft cushions (13, Fig. D1). Onto the stern
locker the are soft seat with soft back (18, Fig. D1).
The boat hull is arranged with the followig components:
— bow towing eye (5);
— two stern cleats (19, Fig. D2e);
— fuel tank (8);
— water tank (9);
— fuel fill (10, Fig. D2a);
— water fill (12, Fig.D2b, D2d);
— box with cap for shower handset (18, Fig.D2e);
— foldable stainless steel ladder(20);
— lifter of stern locker seat;
— cockpit drain systems sockets (11, Fig. D2b, D2c);
— battery disconnector (13, Fig. D2b);
— drain automatic bilge pump (14, Fig. D2c);
RIGID HULL.
D2
b
c
e
d
a
a
1
2
3
6
4
b
8
5
9
c
11
13
12
10
d
17
16
6
3
15
20
e
12
18
19
11
14
7
11