brielmaier 282630, Перевод оригинальной инструкции, Страница: 52 / 63

7 | Fault rectification Brielmaier Motormäher GmbH
52 Twister
NOTE
The fault table listed below gives information about
who is authorised to rectify the fault.
7.3 Fault table
Fault description Cause Remedy Person-
nel
Engine is running, but pick-
up roller is not being
driven. Device drive switched
off. Switch on the device drive
(see main engine
instructions). User
Hydraulic line not
(correctly) connected. Connect hydraulic line
(correctly). User
Chain drive defective. Repair the chain drive. Specialist
dealer
Crop not being collected
properly. Working height set
too high. Lower the working height.
(Adjusting the working
height) User
Plastic tines missing. Replace the plastic tines.
(
Replacing plastic tines
[
}
47])
User
Engine speed too
slow. Increase engine speed.
(see main engine
instructions) User
Travel speed too fast Reduce travel speed User
Fodder becoming
tangled Clean the pick-up.
Cleaning the pick-up roller
[
}
43]
User