Bridgeworks Oresund FCE102200, Руководство пользователя

Страница: 12 / 64

Insert the multi-mode cables in to the SFP as shown below. When the plug is in the correct position
a “click” should be heard.
Using a Copper Interface Cable (SFP+)
If you are using a copper based solution, an SFP+ Direct Attached Copper (DAC) Twin-Ax interface
cable must be used; the maximum supported length of which is a 5 meter passive cable.
To connect the Gateway directly to a device, insert one or two SFP+ cables in to the connector as
shown below. When the plug is connected a “click” should be heard.
12