Installing the Appliance
The following are the basic steps to installing the Appliance:
•
Connecting the Ethernet Interface
•
Connecting the 10Gb Ethernet Cables
•
•
Connecting the 12Gb SAS cables
•
Connecting the Fibre Channel Interface
•
*If an appropriate feature card is installed.
Appliance Configuration
The following image is a representation of the back of the Appliance and can be used to identify the
positions of the various feature cards available on your product.
Product
Onboard Port A
Onboard Port B
Slot 1 (1A/1B)
Slot 2 (2A/2B)
EFC102200
Management
Management
iSCSI Target
FC Initiator
ESAS102800
Management
Management
iSCSI Target
SAS Initiator
FCE102200
Management
Management
FC Target
iSCSI Initiator
FCSAS102800
Management
Management
FC Target
SAS Initiator
SSFC150
Management
WAN
FC
-
SSiS150
Management
WAN
iSCSI
-
Connecting the Ethernet Interface
The onboard Ethernet interfaces on the Appliance can be used on the following network configurations:
• 10BASE-T
• 100BASE-T
• 1000BASE-T (Gigabit)
It is not necessary to specify which network type you are connected to, as the Appliance will
automatically select the correct network speed.
8
