PD70/PD70PLUS
Quick Start Guide
For a single PD70/70PLUS connection to a PanL Hub port, the maximum
length of the RJ45 8P8C cable is 100 meters. Connect the terminator provided
in PanL Hub box to the unconnected PD70/70PLUS port.
For multiple PD70/PD70PLUS connection to a single PanL Hub port, the 1st
connection to PanL Hub and the subsequent connections in between the
PD70/PD70PLUS displays must not exceed 50 meters in cable length. The
total combined cable lengths must not exceed 100 meters. Connect the
terminator provided in PanL Hub box to the last unconnected
PD70/PD70PLUS port. A maximum of two PD70/PD70PLUS can be connected
to a single hub port as shown below:
1.
Mount the PD70/PD70PLUS back cover either on an Arlington LV2*
bracket (Four pieces of 3.5mm x 16 mm, min. length 12mm self-
tapping screws are provided) or on a standard electrical junction box
(86mm x 86mm x 40mm screws; min length 12mm; max. length
20mm- not provided). Two additional on wall screws are provided to
secure PD70PLUS.
2.
If connecting multiple PD70/PD70PLUS displays to a single PanL Hub
port, set the ID switch. Refer to the section -
ID Switch Configuration
for details.
3.
Connect RJ45 8P8C cable and add a terminator. Refer to the section
Display Installation
for details.
4.
Install the front panel on back cover and secure the panel.
*Arlington LV2 low voltage mounting bracket and electrical junction
box are not part of the package.
For multiple PD70/PD70PLUS connections to a single PanL Hub port, the ID
switch at the back of the displays must be configured to be unique. Using a
Philip head screw driver, set a unique number for each display between
0-7
(do not use 8- 9).
For example, if connecting 2 PD70 / PD70PLUS to a PanL
Hub port, you may set it as
0 and 1
. Displays connected to different PanL
Hub ports can share the same unique number.
Product Features
PD70
PD70PLUS
1
Buzzer
2
Ambient Light Sensor
- Automatic screen brightness control
3
Reset Button
4
Reserved for factory use
5
Status indicator
- Refer to the LED Status Indicator section for
more details
6
System Indicator
- Refer to application user guide for more
details
7
RFID Reader
- Refer to RFID Reader section for more details
Display Installation
Wall Mounting
ID Switch Configuration
Please visit
QR
code
for warranty registration with the UUID and Product Key
below:
STICKER AREA
RFID Reader (PD70PLUS only)
The built in 13.56MHz RFID reader supports ISO/IEC 14443 A/MIFARE and
NTAG. The internal transmitter is able to drive a reader antenna designed to
communicate with ISO/IEC 14443 A/MIFARE cards. The receiver module
provides a robust and efficient implementation for demodulating and
decoding signals from ISO/IEC 14443 A/MIFARE compatible cards and
transponders. The digital module manages the complete ISO/IEC 14443
framing and error detection (parity and CRC) functionality.
PD70
Electrical
Junction Box
Arlington LV2
PD70PLUS
PD70
PD70PLUS
