Getting Started: BrickHouse Alert
1. Charge the BrickHouse Alert for 5 hours before it’s first use. Connect the charging cradle
to an electric outlet and place the BrickHouse Alert device into the cradle.
2. When the BrickHouse Alert has completed charging for the first time, press the SOS
button for 2 seconds to test and familiarize yourself with how the 2-way communication
works.
3. Your BrickHouse Alert will dial our monitoring center and a specialist will answer and ask
how they can help you. Let the specialist know you are setting up and testing your
BrickHouse Alert. You will be asked to verify your name and address. Once your
information has been verified, your BrickHouse Alert is ready to be used.
Getting To Know Your BrickHouse Alert
BrickHouse Alert Indicator Lights
Indicator Light
Status State
Event
Power/Battery
Red Light
Slow Flash
Solid Indicator
Solid Indicator will turn off
when command is completed.
Charging
Fully Charged
Power key was pressed and
prepare to power on/off
Two-Way Voice
Blue Light
Slow Flash
Solid Indicator
Registered
SOS key was pressed and
calling monitoring center
Location GPS
Blue Light
Fast Flash
Indicator will not appear.
Turned off.
GPS Signal Active
GPS turned off, GPS signal
invalid