BrickElectric BEM105, Руководство пользователя

Страница: 6 / 40

www.BrickElectric.com
3.2 LAN Mode
1. Connect BEM105 with your routers or computer by Ethernet cable, and then power it on with
5 - 24VDC power supply. (see fig.1.1 at page 2 )
2. Open any TCP test tool (if you don't have any, or you don't know what a TCP test tool is, you
can use BE-Manager , it is within our software package). Open it and see the following Fig.1.2 :
Fig.1.2
3. Click " Connect " button, and wait for module connected. Then, it is able control the relay
module. Click " CH1 OFF " button, and the relay channel 1 will be switched on. See Fig.1.3