Brewer Fitness Treadwall Kore Pro, Полное руководство пользователя

Страница: 34 / 42

42
Treadwall Kore Pro Owner’s Manual—2017
Main Channel Assembly
Con nue installing panels, alterna ng the hole
spacing. Use the speed control lever to control
the descent of the panels.
As you install panels they will move down by
their weight. There will come a point where they
start to move up of their own, and then you will
have to push them down - harder and harder as
you put more on. This is because there are more
panels at the back of the wall - heavier than the
panels in the front.
When this happens, always use blocks of wood
between the bo7om panels and channel flange.
It is safest to do this on both sides as shown to
jam the wall and prevent it from backing up.
The last three panels cannot be put in the same
way. They must be put in from the bo7om, slid up
to meet the other panels, and bolted on.
Remove the covers from the rectangular access
holes at the bo7om of the channels so you can get
to the inside when pu3ng on these last three
panels. Leave the last panel off un l the end of the
installa on - a)er the climbing holds have been put
on and everything has been tested according to the
check list at the end of these instruc ons.