5
before using for the first time
Please follow the information on the use of BRITA
®
filter cartridges and the BRITA
®
Memo
indicated in the BRITA
®
information guide.
1. Remove any packaging/promotional material from the kettle.
2. Always use your kettle on a dry, level, stable, secure work surface.
3. Open the lid and lift out the filter funnel. Wash it in warm, soapy water. Rinse and dry
thoroughly then replace the filter funnel.
4. Follow the section on preparing the BRITA
®
MAXTRA cartridge on page 6.
5. After preparing and installing the BRITA
®
MAXTRA cartridge, fill, boil then discard the
water twice. This will remove any residue left over from the manufacturing process.
Your BRITA
®
filter kettle is now ready for use. Note that you will only need to do this
procedure once and not each time you renew the BRITA
®
cartridge.
Before connecting to a power source, make sure your mains supply voltage is the same
as the one indicated on the appliance. Connect the plug to a suitable power outlet and
make sure that the power cord does not overhang the work surface.
