![background image](http://html1.mh-extra.com/html/breville/kinetix-pro-bbl800-c/kinetix-pro-bbl800-c_instruction-book_2808811010.webp)
10
NOTE
•
When using your for the first time, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
•
When the blender jug is filled at or near the
MAX line, place one hand on the blender
lid to avoid displacement of the lid during
operation. Do not blend hot ingredients,
allow to cool before placing into the blender
jug.
•
Operate the blender only for the appropriate
amount of time required. The blender will
automatically stop blending on the Blend
function after 120 seconds (2 minutes) and
after 60 seconds (1 minute) on the smoothie
and ice/Auto Pulse functions to avoid over
processing.
•
The Smoothie function has a unique
processing technique that blends the
denser ingredients at a lower function,
then increases as ingredients thicken.
This may happen several times while
blending smoothies.
•
During the blending process, ingredients
may stick to the sides of the blender jug.
To push the food back onto the blades, press
the POWER button on the control panel and
switch off at the power outlet and remove
the power cord. Remove the lid and use a
plastic spatula to scrape down the sides of
the jug. Replace the lid before recommencing
blending.
•
If the blades become stuck, the blender
will automatically turn off. To reset turn the
blender off at the power outlet, clean jug with
spatula and then turn back on, blender will
reset.
•
If any moisture or liquid appears on top of
the motor base during blending, press the
POWER button on the control panel, switch
off at the power outlet and remove the power
plug. Remove the blender jug. Wipe the motor
base immediately with a dry cloth or paper
towelling to absorb the liquid. Check the
blender jug is correctly assembled.
DISASSEMBLING
1. Always ensure the blender is switched off
by pressing the POWER button on the
control panel. Then switch off at the power
outlet and unplug the power cord.
2. Remove the blender jug from the motor
base by grasping the handle and lifting the
jug in an upward direction.
3. Remove the blade assembly by upturning
the blender jug and turning the blade
removal system clockwise then lift upwards
and away from the base of the blender.
4. Remove the silicon seal from the blade
assembly.
Содержание Kinetix Pro BBL800/C
Страница 1: ...the Kinetix Pro blender Instruction Book BBL800 C BBL801...
Страница 15: ...15...