TPMUNI2
Basic Flush Ceiling Mount
with Quick Release
Assembly Instructions
PARTS LIST
Qty
Description
1
Arm Assembly with Ceiling Plate
1
Mounting Bracket Head
1
Pressure Plate w/ 4 Countersunk Boreholes
1
Pressure Plate
4
Swivel Arms
Qty
Description
4
Countersunk Phillips Screws
4
Clamping Screws
1 Pkg. M3 Distance Bolts with Screws & Washers
1 Pkg. M4 Distance Bolts with Screws & Washers
1 Pkg. M5 Distance Bolts with Screws & Washers
1 Pkg. M6 Distance Bolts with Screws & Washers
4
Countersunk Phillips Bolts
(These bolts can be used to replace the
clamping screws for security)
2
Allen Wrenches
HARDWARE LIST
STEP 1
Remove the mounting bracket head from the arm assembly by unscrewing the knob as shown
in FIGURE 1. Position the pressure plate (the one with the countersunk boreholes) onto the
mounting bracket head. Using supplied Allen wrench secure together with the countersunk
screws as shown in FIGURE 2.
FIGURE 1
FIGURE 2
Turn Knob to Release
Mounting Head
WARNING: This arm mount is intended to support projectors with a maximum weight of 26 lbs. If your
projector does not have mounting nuts embedded in the bottom, it cannot be attached to this arm mount.
THIS ARM MOUNT IS INTENDED AS A CEILING MOUNT ONLY. A QUALIFIED PROFESSIONAL
SHOULD BE USED TO PROPERLY INSTALL THIS UNIT TO THE CEILING. BRETFORD DOES NOT
RECOMMEND THE USE OF POWER TOOLS AND WILL NOT BE LIABLE FOR THE IMPROPER
USE OR INSTALLATION OF ITS PRODUCTS.
