32 / 40
takes is a relocation of one of these components of a few
inches! Though the remote unit is weather proof, it should
be placed away from direct sunlight, rain or snow.
9 Setting up power supply
Base station
1.
Remove the battery compartment cover.
2.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
3.
Replace the battery compartment cover.
Remote sensor
1.
Remove the battery compartment cover.
2.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
3.
Push the CH button to set the desired transmission
channel (setting CH1, CH2 or CH3 on screen display).
4.
Replace the battery compartment cover.
Pair devices
1.
Wait until all LCD segements are displayed on the base
station.
2.
Press the RESET button on the base station first and
then press the RESET button on the remote sensor.
Station and Sensor are now paired.
10 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. The clock will automat-
ically search for the radio signal.
