18
POWER SUPPLy
Main operation
1. Put the DC power plug (Fig. 1, B) in the DC
jack (Fig. 2, 8). Put the mains plug into the
wall outlet.
2. Push the RESET knob to initialize the
automatic time signal.
Battery operation
1. Open the battery compartment door.
2. Install 3 batteries (AAA size 1.5V) strictly
according to the polarities shown.
3. Reinsert the battery compartment door.
RECEPTION OF RADIO CONTROLLED
TIME SIGNAL
The time and date are radio-controlled.
The current time and date are automatically
synchronized with the time signal transmitted
from Europe. When used for the first time the
clock will start to receive the RC signal in 5
minutes with the signal
LED
km/h
flashing.
NOTE!
1. Everyday the unit will automatically search for
the time signal at 2:00am , 8:00am, 2:00pm
and 8:00pm.
2. Always place the unit away from interfering
sources such as TV set, computer, etc.
3. Avoid placing the unit on or next to metal
plate.
4. The use in airports, cellars, high-rise
buildings or factories is not recommended
due to reception problems.
5. Do not start reception on a moving article
such as vehicle or train.
