Bresser MyTime W, Инструкция по эксплуатации

Страница: 18 / 24

18
POWER SUPPLY
Main operation
1. Put the DC power plug (Fig. 1, B) in the DC jack
(Fig. 2, 8). Put the mains plug into the wall
outlet.
2. Push the RESET knob to initialize the automatic
time signal.
Battery operation
1. Open the battery compartment door.
2. Install 3 batteries (AAA size 1.5V) strictly
according to the polarities shown.
3. Reinsert the battery compartment door.
RECEPTION OF RADIO CONTROLLED
TIME SIGNAL
The time and date are radio-controlled. The current
time and date are automatically synchronized
with the time signal transmitted from Europe.
When used for the first time the clock will start to
receive the RC signal in 5 minutes with the signal
LED
km/h
flashing.
NOTE!
1. Everyday the unit will automatically search for
the time signal at 1:00am , 2:00am and 3:00am.
2. Always place the unit away from interfering
sources such as TV set, computer, etc.
3. Avoid placing the unit on or next to metal plate.
4. The use in airports, cellars, high-rise buildings
or factories is not recommended due to
reception problems.
5. Do not start reception on a moving article such
as vehicle or train.