
DE
INSTRUCTION MANUAL
BR-PHT 160/200
Photo tent
with LED lighting
Art. Nr. F004018 - F004019
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach
of children and animals.
RISK OF ELECTRIC SHOCK!
This unit contains electronic parts that are powered by a power
source (AC adapter or batteries). Follow the instructions carefully and
do not attempt to power this device with anything other than power
sources recommended in this instruction manual, otherwise there is
a DANGER of an ELECTRIC SHOCK!
The glass body of a lamp can shatter when it reaches the end of its
service life. In this case, immediately disconnect the device from the
power source (pull out the mains plug). Even after disconnecting the
mains plug, there is a risk of electric shock due to residual charge!
Never bend, squeeze or pull power cables, connecting cables,
extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with damaged
electrical parts! Damaged parts must be replaced immediately by an
authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
DANGER OF BLEND!
Make sure that people and animals do not look into the light. The
high luminosity can blind the eyes and cause afterimages. This
impairment of vision can lead to accidents.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and
ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! You could knock
the device over.
• Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
• Do not expose the device to high temperatures. Use only the
supplied AC adapter. Do not short-circuit the device or batteries or
dispose of in fire! Excessive heat and improper handling can cause
short circuits, fires and even explosions!
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please contact
your dealer. They will contact the Service Center and can arrange the
return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the
appliance is not in use, in case of a longer interruption of operation
and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power
supply at any time. The power outlet should always be near your
appliance and should be easily accessible, as the plug of the power
cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug
and never pull the cable!
Do not subject the device to excessive vibrations.
SCOPE OF DELIVERY (FIG. 1)
Long rods, 120cm (4x)
Short rods, 100cm (12x)
Large diffusion
blanket (1x)
Corner pieces (8x)
Connecting pieces (4x)
Background clips (3x)
Power adapter (4x)
LED lights w. Connection cable (4x)
Diffusion blanket for lights (4x)
Power cable w. switch (4x)
Background paper (1x)
Black cover (1x)
Blue cover (1x)
GENERAL ASSEMBLY INSTRUCTIONS
Before assembly, remove all accessories from the package and lay
them out on a level surface.
Press the poles firmly into the corner pieces and connecting pieces
during assembly so that the cover later easier can be slipped over
the frame!
Fig. 1