Bresser 7002550, Инструкция по эксплуатации

Страница: 22 / 48

22 / 48
Precipitation measuring range 0 to 9999 mm (0 to 393.7 inches)
Wind speed measuring range 0 to 112 mph, 50 m / s, 180km / h, 97 knots
Dimensions 343.5 x 393.5 x 136 mm
Weight 673 g
Table 2: Multi-sensor
34 EC declaration of conformity
Hereby Bresser GmbH declares that the radio equipment type with 7002550000000
and
7002551
complies with Directive 2014/53/EU. The full text of the EC declaration of conformity is available at
the
following Internet address www.bresser.de/download/7002550000000/
CE/
7002550000000_
7002551_CE.pdf
35 UKCA Declaration of Conformity
Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable
guidelines and corresponding standards. The full text of the UKCA declaration of conform-
ity is available at the following internet address: www.bresser.de/down
load/
7002550000000/
UKCA
/7002550000000
_
7002551_
UKCA
.pdf
36 Cleaning and maintenance
• Before cleaning the device, disconnect it from the power supply (remove plug or remove batteries)!
• Only clean the device externally using a dry cloth. Do not use cleaning solution to prevent damage
to the electronic parts.
Cleaning the rain collector (sinkhole)
1. Rotate the rain collector by 30° anticlockwise.
2. Gently remove the rain collector
3. Clean and remove any debris or insects.
4. Install all parts when they are fully clean and dried.
Cleaning the thermo/hygro sensor
5. Unscrew the 2 screws at the bottom of the radiation shield.
6. Gently pull out the shield.
7. Remove carefully any dirt or insects inside the sensor casing.