Bresser 2010200, Руководство пользователя

Страница: 47 / 104

www.bresser.de
47
Click on the "View " icon. The object can then be moved using one of
the following three methods:
Method 1: Drag the mouse while holding down the left mouse button.
Method 2: Drag the mouse while holding down the middle mouse button.
Method 3: Drag while holding down the Shift key and right mouse button.
● Rotate
Click on the "View " icon. The object can then be rotated using one of
the following two methods:
Method 1: Hold down the right mouse button and drag.
Method 2: Hold down the Shift key and left mouse button and drag.
● Scaling
Turn the mouse wheel to enlarge or reduce the printing plate.
②
Set the view
The user can view the object on the printing plate. There are six views available
in the View menu, i.e. the home view, the view from below, from above, from
behind, from the front, from the left and from the right.
Method 1: Click the [View] button. The drop-down list then lists six views.
Method 2:
Click on the
[View]
button and then click again to open a
submenu with the six views available for selection.
③
Reset the view
There are the following two ways to reset views:
Method 1: Click the [View] menu and select [Home View] .
Method 2: Click the [View ] button on the left, and click it again to display
the display options. You may then click on [Reset] .