Brentwood HOME Base II, Руководство пользователя, Страница: 19 / 28

-16-
Remote A Remote B
Base B
Base A
Synchronizing Two Bases
(for Twin XL and Split sizes only)
Step 1:
Ensure both bases (A and B) are plugged into a power source.
Step 2:
1. Make sure Remote A was already paired to Base A and Remote B
was paired to Base B. If not, please pair them by following the
pairing remote instructions on page 12.
2. On Remote A, press and hold Head Down and
Foot Up at the same time, within 5 seconds, the
Remote A backlit LEDs will blink.
(Named Crossover)
3. Slide the side button to "L" position, then you can use Remote
A to control Base A only.
4. If you slide the side button to "O" position, then you can also
use Remote A to control Base A only.
5. Slide the side button to " R" position, then pair the Remote A
to Base B, you can use Remote A to control Base B only.
If you want to use Remote A to control two bases simultaeously,
slide the side button to "O" position.
Please note: If you want to control the bases through sliding the
side button, only one remote can work. Another remote will not
be workable.
So now you can not use Remote B to control Base B, you need to
re-pair Remote B to Base B. Then if you want to use Remote B to
control two bases, only follow the above steps 2-5 on Remote B.