Jet-Light 2 x 18 W, FL-18-110
Operating instructions
Stand: FL-18-110-05-2006_K
6
9. Cleaning
Pull the plug out before cleaning.For safety reasons, clean the equipment with a dry or damp cloth. Do
not use any acid cleaning agents or chemicals (solvents, petroleum spirits, etc.) or rough sponges.
Never submerge the Jet Light FL-18-110 in water.
10. Disposal
At the end of its life-span, do not dispose of the product with the normal domestic refuse.Enquire
about your local council’s policy for disposing of the device in a proper and environmentally-friendly
way.
11. Trouble-shooting
Fault
Possible cause(s)
Remedy
Jet Light FL-18-110 does not
switch on
- lamp or
- starter is defective
- Replace lamp or
- starter
Jet Light FL-18-110 does not
work
- Electricity supply has been
interrupted or there is not
connection to the mains
- Check correct plug
connection and fuse
IMPORTANT:
All other repairs must be carried out only by a technician.
12. Guarantee and service
This article is guaranteed for 2 years.
Repairs must only be carried out by an authorised dealer.
Damage caused by improper operation, non-observance of the operating instructions are not included
in the guarantee. Also excluded from the guarantee are wearing parts (e.g. light bulbs).
Service address:
Hugo Brennenstuhl GmbH, Seestraße 1-3, D-72074 Tübingen, Germany
Telephone:
+49(0)
7071-8801-0
Fax:
+49(0)
7071-87657
13. Conformity declaration
The CE symbol is used in accordance with the following European Directives:
2006/96/EG Low voltage directive
89/336/EEC Electro-magnetic compatibility Directive
The declaration of conformity is lodged with the manufacturer.
Manufacturer:
Hugo Brennenstuhl GmbH, Seestraße 1-3, D-72074 Tübingen, Germany
Flachleuchte 2x18Watt-GB-110V-Dr6 6
Flachleuchte 2x18Watt-GB-110V-Dr6 6
19.06.2007 08:33:53
19.06.2007 08:33:53