Page 5
2.
1.
Deleting the end position can also be done as follows:
When step 1, setting up the first channel also the limit setup will be removed.
2.
1
x P2
1x
▼
1x P2
The end positions are now removed
from the memory of the motor.
You can now re-read the end position.
Press
P2
button 1x.
Press the button
down
. Press
P2
button 1x.
_______________________________________________________________________________
Option C Teaching multiple transmitters
(Up to 20 transmitters per receiver)
2x P2 1x P2
Press
P2
button 2x Go to new channel or transmitter
b
/
Programming the new
Go to existing channel / transmitter
a
.
of the existing
(to remove channel / transmitter)
transmitter/channel is ready.
channel / transmitter
a
.
Press 1x
P2
button of the new
channel or transmitter
b
.
To delete one channel , you must repeat the above operation.
______________________________________________________________________________
Option D Delete all
1x P2 1x STOP 1x P2
Press P2 button 1x Press stop button 1x
Press P2 button 1x
All channels are removed
_______________________________________________________________________________
Option E Pulse setting
1x P2
1x
▲
1x
▼
OK
Press P1 button 1x
Press up button 1x
Press down button 1x
To remove the pulse setting, repeat the above operation.
