SPECIFICATIONS
60
11.1.3 Surface treatment
•
After surface preparation, one layer of two-component acrylate is used for
surface protection.
•
All galvanised parts have been provided with an electrolytic zinc layer of 15 - 20
microns (0.6 - 0.8 mil).
11.1.4 Lubricant table pump
Bredel Genuine Hose Lubricant is registered at NSF: NSF Registration N
o
123204;
Category Code H1. Also refer to: www.NSF.org/USDA.
An alternative lubricant is available based on silicone. Also compatibility with this
lubricant must be checked if applied. Refer to the chemical compatibility chart at
www.wmftg.com/chemical or contact your Bredel representative for guidance.
Unit
APEX28
APEX35
Lubricant
-
Bredel Genuine Hose
Lubricant
Bredel Genuine Hose
Lubricant
Required quantity
liters
2.0
4.0
gallons
0.53
1.06
Components:
Glycerol
(C
3
H
8
O
3
)
50-100% w/w
Glycol
(C
2
H
6
O
2
)
2.5-10% w/w
Water
(H
2
O)
Consult your Bredel representative if you require additional information with
respect to the safety data sheet.
WARNING
It is the users responsibility to ensure the chemical compatibility of the fluid
to be pumped with the lubricant in the pumphead. Obey the local Health
and Safety regulations.