background image

Conditions when starting the tank cleaning

Designation

Size

Absolute pressure

0.8...1.1 bar

Ambient temperature

See the instruction manual of the

cleaner

Operating temperature

See the instruction manual of the

cleaner

Temperature in the tank

See the instruction manual of the

cleaner

Acidity content

Maximum of 21% by volume

Relative ambient humidity

until saturation

2.3

Operating Conditions

The cleaner is driven by the cleaning liquid flowing through it at a suitable

pressure and flow rate. For effective operation, the cleaning fluid must be

supplied to the cleaner at the correct pressure, flow and temperature. The

requirements are specified in the tables below.

2.3.1

Temperature

The maximum surface temperature depends mainly on the operating conditions

and not on the device itself. Therefore, the device is characterized for a range of

temperature classes or a temperature range.
The temperature classes define ignition ranges, according to which combustible

gases and flammable liquids are classified according to their specific ignition

temperature. The ignition temperature of the media can be determined from

relevant tables, e.g. International Chemical Safety Cards (ICSC) http://

biade.itrust.de.
To comply with the required temperature class, the respective maximum

operating and ambient temperatures must be strictly observed and monitored:

The following table applies to Orbital Cleaner, Troll Ball, Turbo SSB, Sanitor, Turbodisc, Chemidisc and Sanidisc.

Temperature
class

Maximum surface temperature

Proper operating conditions

T3

≤200 °C

Operating and medium temperatures - maximum 95°C
Ambient temperature: maximum 140°C (minimum °C)

T4

≤135 °C

Operating and medium temperatures - maximum 95°C
Ambient temperature: maximum 100°C

T5

≤100 °C

Operating and medium temperatures - maximum 75°C
Ambient temperature: maximum 75 °C

T6

≤85 °C

Operating and medium temperatures - maximum 60 °C
Ambient temperature: maximum 60 °C

Safety

Operating Conditions

 

430BAL011767EN_3

10

28.05.2018

Содержание Planetary Gear PEEK



























Отзывы: