Breckwell BH32VF, Инструкция и руководство по эксплуатации для владельца

Страница: 14 / 24

14
© 2021 Breckwell Hearth
LOG PLACEMENT
WARNING:
POSITIONING OF THE LOGS IS CRITICAL TO THE SAFE
AND CLEAN OPERATION OF THIS HEATER. SOOTING AND
OTHER PROBLEMS MAY RESULT IF THE LOGS ARE NOT
PROPERLY AND FIRMLY POSITIONED IN THE APPLIANCE.
NEVER ADD ADDITIONAL LOGS OR EMBELLISHMENTS
SUCH AS PINE CONES, VERMICULITE OR ROCK WOOL
TO THE HEATER. ONLY USE THE LOGS SUPPLIED WITH THE
UNIT. FAILURE TO POSITION THE PARTS IN ACCORDANCE
WITH DIAGRAMS BELOW OR TO USE ONLY PARTS
SPECIFICALLY APPROVED FOR THIS HEATER MAY RESULT
IN PROPERTY DAMAGE OR PERSONAL INJURY.
Before you begin - This unit is supplied with five ceramic
fiber logs. Do not handle these logs with your bare hands.
Always wear gloves to prevent skin irritation from ceramic
fibers. After handling the logs, wash your hands gently with
soap and water to remove any traces of fibers.
NOTE: When placing logs DO NOT cover the burner ports.
Rear Log
Support
Bracket
Left Log
Support
Bracket
Right Log
Support Bracket
PILO
T
OFF
Log Support
Bracket Studs
Burner Ports
1. To install the back log (#1), position on rear log support
bracket and then press down over studs.
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Right Top
Log #5
Rear Log
Support
Bracket
Left Log
Support
Bracket
Right Log
Support Bracket
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Right Top
Log #5
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Log #5
PILO
T
OFF
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Left Bottom
Log #2
Top Left
Log #4
Log #4
Back Log #1 Top Left
Log #4
Log Support
Bracket Studs
Burner Ports
Left Bottom
Log #2
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Log #5
Top Left
2. Install left bottom log (#2) on left log support bracket in
front of back log.
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Right Top
Log #5
Rear Log
Support
Bracket
Left Log
Support
Bracket
Right Log
Support Bracket
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Right Top
Log #5
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Log #5
PILO
T
OFF
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Left Bottom
Log #2
Top Left
Log #4
Log #4
Back Log #1
Top Left
Log #4
Log Support
Bracket Studs
Burner Ports
Left Bottom
Log #2
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Log #5
Top Left
3. Install right bottom log (#3) on right log support bracket
in front of back log.
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Right Top
Log #5
Rear Log
Support
Bracket
Left Log
Support
Bracket
Right Log
Support Bracket
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Right Top
Log #5
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILO
T
OFF
Log #5
PILO
T
OFF
PILO
T
OFF
Left Bottom
Log #2
Back Log #1
Left Bottom
Log #2
Top Left
Log #4
Log #4
Back Log #1
Top Left
Log #4
Log Support
Bracket Studs
Burner Ports
Left Bottom
Log #2
Right
Bottom
Log #3
Right
Bottom
Log #3
Right
Bottom
Log #3
Log #5
Top Left