Brecknell 67 U Series Скачать руководство пользователя страница 33

Страница: 33 / 86

67XXU USB/Serial Scale Service Manual

4.6 Display Software and Hardware Version

Display the current version of software and hardware.

Enter the Setup Mode by pressing the

[HOLD] + [ON/OFF]

keys until

confg

displayed.

Use the

[UNIT]

key to select the MISC-VER menu.

Press

[TARE]

to display the current version.

3a.

Firmware Version display Format is: Vxx.yy, xx is hardware version, yy is
software version.

Press the

[ON/OFF]

key to return to last menu item.

4.7 Display Test

Press the

[HOLD] + [ON/OFF]

keys until

confg

is displayed.

Use the

[UNIT]

key to select TEST-DSP.TS menu.

Press

[TARE]

to enter the test display mode and all segments will light at first.

2a.

In this mode, every press of the

[UNIT]

key will light the next segment. Every

press of the

[HOLD]

key will light the next digit.

2b.

Press the

[TARE]

key to automatically light all segments and all digits.

Press the

[ON/OFF]

key to return to last menu item.

Содержание 67 U Series























































































Результаты поиска

Содержание 67 U Series

Отзывы:

Похожие инструкции для 67 U Series

Бренды по названию

Популярные бренды

Brecknell 67 U Series, Руководство по обслуживанию

Результаты поиска

Содержание 67 U Series

Отзывы:

Похожие инструкции для 67 U Series

Бренды по названию

Популярные бренды