Breas Z1 Скачать руководство пользователя страница 7

Страница: 7 / 36

Doc. HD40-0007-02 En-Eu L-4

CAUTIONS:

• The temperature of the airflow for breathing produced by CPAP devices can be higher

than the temperature of the room. This is true of all CPAP devices. Caution should be
exercised when using your

at room temperatures warmer than 32˚C (90˚F).

• Only operate the

and accessories within the operating temperature, humidity and

altitude conditions specified in the Technical Specifications section of this User Guide.

• Only store or transport the

and accessories within the storage and transport

temperature, humidity and altitude conditions specified in the Technical Specifications
section of this User Guide.

• Damage to the

CPAP Tube

may result in air leaks. If this occurs, stop using the damaged

CPAP Tube

and replace immediately.

Battery Warnings and Cautions

The

PowerShell

comes with a removable

Lithium Ion Battery

. Careful attention must be paid to

the warnings and cautions described below relating to the

Battery

. Misusing the

Battery

may

cause the

Battery

to get hot, rupture, ignite and cause serious injury.

WARNINGS:

• Do not place the

Battery

in fire or heat the

Battery

• Do not install the

Battery

backwards so that the polarity is reversed.

• Do not connect the positive terminal and the negative terminal of the

Battery

to each

other with any metal object (such as wire).

• Do not carry or store the

Battery

together with necklaces, hairpins, or other metal objects.

• Do not pierce the

Battery

with nails, strike the

Battery

with a hammer, step on the

Battery

or otherwise subject it to strong impacts or shocks.

• Do not solder onto the

Battery

• Do not expose the

Battery

to water or salt water, or allow the

Battery

to get wet.

• Do not disassemble or modify the

Battery

. The

Battery

contains safety and protection

devices which, if damaged, may cause the

Battery

to generate heat, rupture or ignite.

• Do not place the

Battery

on or near fires, stoves or other high-temperature locations.

Do not place the

Battery

in direct sunlight, or use or store the

Battery

inside cars in hot

weather. Doing so may cause the

Battery

to generate heat, rupture or ignite. Using the

Battery

in this manner may also result in a loss of performance and a shortened life

expectancy.

• Immediately discontinue use of the

Battery

if, while using, charging or storing the

Battery

the

Battery

emits an unusual smell, feels hot, changes color, changes shape or appears

abnormal in any other way. Contact Breas or your health care provider if any of these
problems are observed.

Содержание Z1





































Результаты поиска

Содержание Z1

Отзывы:

Похожие инструкции для Z1

Бренды по названию

Популярные бренды

Breas Z1, Руководство пользователя

Результаты поиска

Содержание Z1

Отзывы:

Похожие инструкции для Z1

Бренды по названию

Популярные бренды