Breas Vivo 3 Скачать руководство пользователя страница 64

Страница: 64 / 143

Make sure that nothing can block
the patient air inlet at the back of
the Vivo 3, such as a curtain etc.

5.3

Connecting the Vivo 3 to Power Supply

This chapter describes how to connect a Breas power supply.

WARNING!

Read the chapter 2.2

Electricity

—

Warnings and Precautions

, page 19 carefully to make

sure all conditions are considered and met.

CAUTION!

Mains isolation is provided by the approved AC/DC and DC/DC adapters. The ven-
tilator must only be powered by the approved AC/DC or DC/DC adapter (acces-
sory) listed in 10

Accessories

, page 130.

Plug the DC plug by turning it into
the power port at the back of the
Vivo 3.

Make sure that the mains cord is connected to the power adapter (a).

Turn the DC plug clockwise 90 degrees (b).

a) If using mains power, connect the AC plug to the mains supply outlet:

64 Prepare the Vivo 3 for Use

Vivo 3 Clinician

’

s Manual

Doc. 007232 Y-2

Содержание Vivo 3
















































































































































Результаты поиска

Содержание Vivo 3

Отзывы:

Похожие инструкции для Vivo 3

Бренды по названию

Популярные бренды

Breas Vivo 3, Руководство для клиницистов

Результаты поиска

Содержание Vivo 3

Отзывы:

Похожие инструкции для Vivo 3

Бренды по названию

Популярные бренды