41
Cleaning the iSleep 20 and Replacement of Accessories
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
HA 01 Humidifier
The HA 01 humidifier must be cleaned regularly.
The HA 01 humidifier shall be replaced in intervals according to the manufac-
turer's instructions. Also check the HA 01 humidifier for damage regularly. In
case of damage, replace the HA 01 humidifier.
Patient Circuit
3
Detach the rear lid or the
HA 01 humidifier (if mounted).
4
Disconnect all cables.
5
Clean the outside of the iSleep 20
using a lint-free cloth and a mild
detergent solution. If the iSleep 20
needs to be disinfected, this can be
done with Virkon
®
or Lysetol
®
Med.
6
Reconnect cables and the
patient circuit. Make sure all
parts are dry before the
iSleep 20 is put into operation.
Information on cleaning the HA 01 humidifier can be found in the Breas
HA 01 humidifier User Manual.
The patient circuit should be cleaned and replaced in accordance with the manufac-
turer’s instructions.
