background image

3

Intended Use of the iSleep 20

iSleep 20 clinician’s manual

Doc. 003923 En-Us V-2

1

Intended Use of the iSleep 20 

1.1 What is the iSleep 20?

The iSleep 20 is a CPAP system that provides a continuous positive airway pres-
sure. This can prevent the user’s upper airways from collapsing and therefore
avoid breathing problems associated with airway collapse and obstruction.

WARNING!

iSleep 20 must only be used:

For the intended treatment in accordance with this manual
and with the instructions given by the responsible clinical
personnel.

In accordance with the operating conditions specified in
this manual.

In original and unmodified shape and only with accessories
specified or approved by Breas Medical AB.

Every other use may lead to risk of personal injury!

CAUTION!

Read this manual thoroughly so that you completely under-
stand how the iSleep 20 is operated and maintained before tak-
ing it into use, to ensure correct usage, maximum performance
and serviceability.

WARNING!

Do not use the iSleep 20 for any kind of life support treatment.

Breas Medical AB reserves the right to make changes to this prod-
uct without any prior notification.

Содержание iSleep 20





















































Отзывы: