22 Functions and Parameters of the iSleep 20
iSleep 20 clinician’s manual
Doc. 003923 En-Us V-2
4
Functions and Parameters of the iSleep 20
This chapter includes descriptions of the settings used for controlling the func-
tions of the iSleep 20.
4.1 Settings
All the parameters that are used for controlling the breathing by the iSleep 20
are listed below.
CPAP
The CPAP setting sets the pressure for the CPAP (Continuous Positive Airway
Pressure) mode.
The Ramp Function
The ramp function provides a pressure increase from the ramp start pressure to
the set CPAP pressure during a set time.
Snooze
The snooze function allows the patient to pause the treatment.
Humidifier (optional)
The humidifier function is adjustable to provide additional humidity to the
patient air.
Automatic Restart After Power Fail
Read the chapter “Settings Applicable for iSleep 20” on page 35 for information
about the modes and ranges the different settings work with.
CPAP
Ramp start pressure
Set ramp time
Pressure
Time
Ramp start
