manualshive.com logo in svg

Breas Medical Vivo 45, Руководство пользователя

Поделиться
Скачать
Breas Medical Vivo 45 Скачать руководство пользователя страница 8

8 Introduction

Vivo 45 User Manual

Doc.006149 En Y-2 

1.6 About this Manual

Audience

This manual is intended for patients and other lay users operating the
Vivo 45.

    

Icons

In this manual, icons are used to highlight specific information.
The meaning of each icon is explained in the table below.

Always read this manual before setting up and using the Vivo 45 or per-
forming maintenance on the machine, to ensure correct usage, maxi-
mum performance and serviceability.

I

CON

E

XPLANATION

Warning!

Risk of death or serious personal injury.

Warning!

Risk of electric shock.

Warning

Risk of Cross-contamination.

Warning!

Hot surface, risk of burns.

Warning!

Flammable material, risk of fire.

Caution!

Risk of equipment damage, loss of data, extra work, or 
unexpected results.

Note

Information that may be valuable but is not of critical 
importance, tips.

Reference

Reference to other manuals with additional information 
on a specific topic.

Содержание Vivo 45



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды