Breas Medical Vivo 45, Руководство пользователя

Страница: 14 / 226

14 Safety Information
Vivo 45 User Manual
Doc.006149 En Y-2
2.2 Electrical Safety
• Do not operate the Vivo 45 if it has a damaged power supply or cas-
ing.
• To avoid electrical shock, disconnect the electrical supply to the
Vivo 45 before cleaning. Do not immerse the Vivo 45 into any fluids.
• If a multiple portable socket-outlet is used, it must not be placed on
the floor.
• Do not use more than one multiple portable socket-outlet or exten-
sion cord.
• The operator must not touch accessible contacts of connectors and
the patient simultaneously.
• Nurse Call must only be connected to a safety extra low voltage sys-
tem with an isolation from mains voltage which complies with the
requirements of IEC 60601-1.
• The aspects of electromagnetic compatibility (EMC) must be consid-
ered. The Vivo 45 should not be used adjacent to or stacked with
other equipment; if adjacent or stacked use is necessary, the Vivo 45
should be observed to verify normal operation in that configuration.
Mobile or transportable radio transmitters may interfere with the
Vivo 45.
Guidance for safe installation of the Vivo 45 can be found in “Emis-
sion and Immunity Declaration” on page 187.
• If a portable AC power supply is used, make sure that the voltage var-
iations are within the operating limits of the Vivo 45.
See “Power Supply” on page 182 for AC operating limits.
• Use of accessories, transducers and cables other than those specified
or provided by Breas could result in increased electromagnetic emis-
sions or decreased electromagnetic immunity of this equipment and
result in improper operation.
• Avoid touching the contacts within the Vivo 45 click-in battery com-
partment. Under certain circumstances touch current limits per IEC
60601-1 may be exceeded.